Jeff Newman's OE9 (Open Strings) Pedal Steel Tuner

What is a sweetened pedal-steel tuning?

Pedal-steel players rarely tune to pure equal temperament. They sweeten the tuning, offsetting individual notes by fractions of a cent so common chords ring beatless. These offsets are not random: Jeff Newman measured the instruments of working professionals and averaged them into the system taught at Jeffran College.

Why a classic strobe made you change the reference

On a classic hardware strobe (Peterson, Conn), a black-and-white patterned wheel spins at a reference rate while a signal-driven strobe lamp fires once per cycle of the played note. To sweeten a string you changed the tuner's internal reference frequency before tuning that string, which changed the rate the wheel spun, until the pattern froze at the sweetened pitch - one reference change per string.

Why StroboPro does not need to

StroboPro computes each string's exact target frequency directly from its cents offset against a single A4 = 440 Hz reference, then locks its multi-harmonic rings to that exact frequency. There is no reference to juggle and no wheel to re-rate - the sweetening is built into the target, per string, automatically.

Ground-truth inputs

Offsets are derived from Newman's per-string chart, which lists each note as a tuner-calibration Hz value relative to A4 = 440 (not the note's absolute frequency). Exact conversion: cents = 1200 * log2(calibration_Hz / 440). The widely-circulated "1 Hz = 4 cents" chart is a rounded approximation of these same values.

Source: Jeff Newman's tuning charts (jeffran.com, Wayback Machine).

This preset: Jeff Newman's OE9 (Open Strings)

Use OE9 with every pedal and knee lever at rest. It shares SE9's relative sweetening shifted 9.8 cents flatter overall: its E strings sit at 0 cents, without cabinet-drop pre-compensation. Then switch to Jeff Newman's OP9 (Pedals & Knee Levers) and tune each engaged change.